Best WI-Fi Routers 2023: High-Speed, Low Cost Choices for Wi-Fi 6, 6E and 7

Quick List

Your Wi-Fi router is at the heart of your daily computing experience. You can have the best CPU and the best graphics card on the market, but most workloads, from gaming to productivity, use an Internet connection so, if your router is less than ideal, you will be leaving real-world performance and usability on the table for any device that’s not connected via Ethernet. Even if your Internet connection is 300 Mbps and your router claims to be capable of 1,200 Mbps, you may not get full speed.

Fortunately, you don’t need to spend a lot of money to purchase a router that’s more than adequate for even a mid-sized home. Below, we’ll list the best Wi-Fi 6 and 6E routers based on our testing and some of these cost less than $100. 

Quick List

Best Wi-Fi Routers

Why you can trust Tom’s Hardware

Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

Best Wi-Fi Router for Most People

(Image credit: Tom’s Hardware)

Best for Wi-Fi Router for Most People

Specifications

Wi-Fi Standard: Wi-Fi 6

Bands: 2.4 GHz, 5 GHz

Ports: 4x Gigabit Ethernet out, 1x WAN port

Size: 9.06 x 5.28 x 2.20 inches

Reasons to buy

+

Great Value

+

Low Latency

+

Easy Setup

Reasons to avoid

Mediocre 2.4-GHz Speeds

Limited parental controls

Asus’s RT-AX1800S is an affordable Wi-Fi 6 router that just works.  Typically priced at less than $70, this unassuming Wi-FI router delivered consistent throughput, particularly on the high-speed, 5-GHz band where it notched very competitive rates of around 300 and 250 Mbps from near and far distances. Even some network congestion had little effect on performance.

We love the RT-AX1800S’s attractive, easy-to-navigate control panel which is available via a web interface, but there’s also a mobile app for those who want it. Setup was a breeze thanks to a built-in wizard that steps you through the process of choosing an SSID, setting and a password an enabling other basic features.

The router also features Alexa integration, manual control of the QoS priorities and VPN / firewall configuration. The built-in parental controls are lacking, though, as you can block devices or set Wi-Fi free times, but not much else.

Unlike some routers which require expensive subscriptions to get security software, the RT-AX1800S has built-in features from Trend Micro, including Malicious Site Blocking and Infected Device Prevention. It even does a security assessment of itself and provides advice on how you could configure the router to be more secure.

Read: Asus RT-AX1800S Router Review

Best Wi-Fi 6E Router

(Image credit: Tom’s Hardware)

Best Wi-Fi 6E Router

Specifications

Wi-Fi Standard: Wi-Fi 6E

Bands: 2.4 GHz, 5 GHz, 6 GHz

Ports: 1x 2.5 Gigabits port for WAN/LAN, 1x Gigabit port for WAN/LAN, 3x Gigabit port for LAN, 1x USB 3.0

Size: 13.3 x 8.8 x 7.8 inches

Reasons to buy

+

Excellent 6-GHz Performance

+

Attractive light show

+

Good web-based UI

Reasons to avoid

5 and 2.4-GHz performance could be better 

If you’re willing to spend closer to $200, the MSI RadiX AXE6600 is a fantastic choice. This Wi-Fi 6E router delivers really strong throughput on the 6-GHz band, which is exclusive to 6E (and Wi-Fi 7) routers. On our iPerf network tests, the RadiX AXE6600 achieved speeds of up to 532 Mbps, nearly 200 Mbps ahead of its nearest competitor. Those numbers shrank a bit at far distances, but you can’t get much faster when you have a solid connection.

At 5 GHz, the RadiX was also strong at near connections, hitting a rate of 486 Mbps, the best we tested. But those numbers dropped a bit when we moved farther away or introduced a lot more network traffic. The router’s 2.4-GHz performance was mediocre, but if you’re looking for high speeds, you’d use the 5 or 6-GHz band for your device.

The RadiX AXE6600 also has a great web control panel, filled with great information about your router, even the CPU and memory consumption, two things we rarely even look at on a router. MSI’s router also has a plethora of RGB lights, but to customize them, you’ll need to use the MSI Center software on your PC.

Read: MSI RadiX AXE6600 Wi-Fi 6E Review

Best Wi-Fi 7 Router

(Image credit: Tom’s Hardware)

Best Wi-Fi 7 Router

Specifications

Wi-Fi Standard: Wi-Fi 7

Bands: 2.4 GHz, 5 GHz, 6 GHz

Ports: 2x 2.5 Gigabits port for WAN/LAN, 2x 10 Gigabit port for WAN/LAN

Size: 7.2 x 8.7 x 3.5 inches

Reasons to buy

+

Epic speeds

+

Easy setup

+

Attractive design

Reasons to avoid

Expensive

No web interface

If you’re looking for blistering fast speeds and money is almost no object, Amazon’s Eero Max 7 could be for you. One of the first Wi-Fi 7 routers, it delivered throughput speeds as high as 1,130 Mbps in our tests, though those numbers shrunk considerably at farther distances. Even at 5-GHz, speeds were stronger than you get with most Wi-Fi 6E routers.

However, if you really want to take advantage of the Eero Max 7’s full bandwidth, you’ll need client devices – a computer, phone or tablet – that has a Wi-Fi 7 radio built in. Most devices today still don’t have that capability.

If you have a larger home and want better reception, you can buy two or three nodes of the Eero Max 7, because it is a mesh router. Setting up and adding nodes is a breeze if you use the Eero mobile app. Unfortunately, there’s no web interface at all. 

The app has an Eero Labs feature which allows you to enable Local DNS caching, get optimizations for gamines or videos and turn on WPA3 security. You can also get features such as content filters, ad blocking, VPN and historical data if you pay $99 a year for Eero Plus.

Read: Amazon Eero Max 7 Wi-Fi 7 Mesh Router Review

Best Wi-Fi 6E Value

(Image credit: Tom’s Hardware)

Best Wi-Fi 6E Value

Specifications

Wi-Fi Standard: Wi-Fi 6E

Bands: 2.4 GHz, 5 GHz, 6 GHz

Ports: 3x Gigabit Ethernet ports, 1x Gigabit WAN port

Size: 10.3 x 6.6 x 2.4 inches

Reasons to buy

+

Great value for the money

+

Great 5-GHz performance

+

Low latency

Reasons to avoid

Mediocre 6-GHz throughput

Light on features

Ugly looking

If you’re looking to get Wi-Fi 6E without spending too much, the Tenda RX27 Pro gets the job done for less than most competitors. At press time, the tri-band router was selling for just $134 on Amazon, putting it in the same price range as some Wi-Fi 6 routers.

When it comes to performance at 5 GHz and 2.4 GHz, the RX27 Pro is no slouch. It had our second highest speeds of any router we tested on 5 GHz and, when the network was congested or we were far from the router, it was actually the fastest overall. It had similarly strong performance at 2.4 GHz. 

At 6-GHz, the throughput is much less impressive as, in our tests, it was actually a little slower than 5 GHz but not by much. On the bright side, it had really low latency at 6 GHz, which  is what really matters when you’re gaming.

Setup is simple, using a very straightforward web interface. Better still, the router has very helpful parental controls that allow you to set time limits, restrict URLs and set black lists / white lists. You can even set times of day where Wi-Fi turns off to encourage family time or bedtime. We don’t particularly like the design of the Tenda RX27 Pro, but most people don’t want to enter their routers in a beauty contest.

Read: Tenda RX27 Pro WiFi 6E Router Review

Best Wi-Fi 6 Performance

(Image credit: Tom’s Hardware)

Best Wi-Fi 6 Performance

Specifications

Wi-Fi Standard: Wi-Fi 6

Bands: 2.4 GHz, 5 GHz

Ports: 4x Gigabit Ethernet ports, 1x Gigabit WAN port

Size: 8.9 x 6.3 x 2.4 inches

Reasons to buy

+

Great 5 GHz throughput at close range

+

Low Latency

+

Flexible parental controls

Reasons to avoid

Annoying setup

Weak with network congestion

Available for around $72, the D-Link AX3200 Smart Router R32 is a strong budget choice that offers some of the fastest 5 GHz performance we’ve seen on a Wi-Fi 6 router. On an uncongested network, the R32 delivered 431 Mbps, 80 Mbps above its nearest competitor, at close range and a strong 364.8 Mbps at far range. On a congested network, the far performance shrank quite a bit but the near performance was still really strong. 

Latency matters even more than throughput, because it determines how quickly online games respond to your commands. The R32 also had low latency, delivering some of the fastest pings in its class at near distances, though far distances were a bit worse. We were not able to test latency or throughput at 2.4 GHz.

You can set up D-Link’s router either via its web interface or an Eagle Pro Ai app for iOS or Android. D-Link says that the router uses AI to help route and prioritize traffic, something that most routers do in one form or another. 

The R32 also has a slew of helpful features that include port forwarding, guest network setup, firewall rules and parental controls. The parental controls are pretty advanced, allowing you to create up to 12 different profiles for different family members.

Read: D-Link AX3200 Smart Router R32 Review

Best Router for Metered Internet

(Image credit: Tom’s Hardware)

Best Router for Metered Internet

Specifications

Wi-Fi Standard: Wi-Fi 6

Bands: 2.4 GHz, 5 GHz

Ports: 4x Gigabit Ethernet ports, 1x Gigabit WAN port

Size: 9.3 x 7.3 x 2.6 inches

Reasons to buy

+

Low latency

+

Good access control options

+

Traffic metering controls

Reasons to avoid

Mediocre 2.4-GHz speeds

Advanced security, parental controls need subscription

Available for around $72, the D-Link AX3200 Smart Router R32 is a strong budget choice that offers some of the fastest 5 GHz performance we’ve seen on a Wi-Fi 6 router. On an uncongested network, the R32 delivered 431 Mbps, 80 Mbps above its nearest competitor, at close range and a strong 364.8 Mbps at far range. On a congested network, the far performance shrank quite a bit but the near performance was still really strong. 

Latency matters even more than throughput, because it determines how quickly online games respond to your commands. The R32 also had low latency, delivering some of the fastest pings in its class at near distances, though far distances were a bit worse. We were not able to test latency or throughput at 2.4 GHz.

You can set up D-Link’s router either via its web interface or an Eagle Pro Ai app for iOS or Android. D-Link says that the router uses AI to help route and prioritize traffic, something that most routers do in one form or another. 

The R32 also has a slew of helpful features that include port forwarding, guest network setup, firewall rules and parental controls. The parental controls are pretty advanced, allowing you to create up to 12 different profiles for different family members.

Read: D-Link AX3200 Smart Router R32 Review

Best Looking Router

(Image credit: Tom’s Hardware)

Best Looking Router

Specifications

Wi-Fi Standard: Wi-Fi 6E

Bands: 2.4 GHz, 5 GHz, 6 GHz

Ports: 1x Gigabit Ethernet (WAN), 1x 2.5 Gigabit Ethernet (WAN), 4x Gigabit Ethernet, 1x USB-C

Size: 14.3 x 6.5 x 8.2 inches

Reasons to buy

+

Attractive Design

+

Good 6 GHz performance, even under congestion

+

Easy setup

Reasons to avoid

Subscription for parental and security controls

Middling throughput at 2.4 and 5 GHz

Pricey

This speedy, high-end router has a unique design that makes it look like a space-ship with wings that shoot upward (a lot like Kylo Ren’s shuttle in Star Wars). Its lights are tucked in the back to avoid any garishness. But the Netgear Nighthawk RAXE300 is more than just an attractive showpiece for your living room as it provides strong 6-GHz performance and simple setup.

On our tests, the Nighthawk was third fastest among Wi-Fi 6E routers, delivering throughput of 340 Mbps at near distances and 214 Mbps at far distances. Those numbers barely changed, even when the network was congested, with the near speed going down to 320 Mbps. On the 5-GHz band, the Nighthawk was more than capable but not one of the fastest and, at 2.4-GHz, it was in the middle of the pack. 

Using the web-based browser control panel,  you can configure the QoS (Quality of Service) settings in order to prioritize certain devices or tasks. You can also set up file sharing through the router if you have a storage device plugged into its USB-C port. And you can enable a DLNA media server. However, if you want detailed security and parental controls, you’ll have to pay for two different subscription services.

Read: Netgear Nighthawk RAXE300 Review

What to Look for in a Wi-Fi Router

  • Wi-Fi 6, 6E or 7? If you can spend the extra money (usually in the $200+ range), you get an additional band, 6 GHz, with a Wi-Fi 6E router and some added throughput. However, the best value for the money lies at Wi-Fi 6, where you can get a really good router for less than $100. Wi-Fi 7 is significantly faster but it’s bleeding edge and costs at least $500, and most devices don’t support it yet.
  • Control panel software? The traditional way to set up a router is using a web-based interface from a computer. Many routers can be controlled via smartphone apps, but we recommend avoiding any model that can only be set up via an app. That limits your ability to configure the router when your phone is not around and could force you to reset the router if you lose or wipe your phone.
  • Mesh or not Mesh? Some routers are part of a mesh system that allows you to place one or more “satellites” in locations around your home in order to boost far connectivity. However, mesh networking devices cost more and the satellites can introduce latency into the network when you connect to them. So if you don’t have a huge home or connectivity issues on different floors, we recommend sticking with a single router.

How We Test Wi-Fi Routers

How We Test Wi-Fi Routers

To see how each router performs in the real world, we go through the setup process and test out its control panel software and any mobile apps you can use to control it. We then use benchmarks to determine both throughput and latency.

To measure throughput speeds, we use iPerf3, a tool that transfers packets on the local network between a server PC, which we connect to the router via Ethernet, and a client device that we use wirelessly. We use a local server rather than hitting one on the Internet, because we don’t want to be limited by the bandwidth of our Internet connection, which can vary even from one moment to the next.

Perhaps because we are dealing with both a client and a server or because there’s a lot of hype when it comes to router speeds, the throughput numbers we get on iPerf3 are always much lower than the theoretical maximums that vendors advertise. For example, while Wi-Fi 6E boasts theoretical speeds of 9.6 Gpbs, we never saw one go above 1,000 Mbps. And, in most cases, we got 500 Mbps or lower. On Wi-Fi 6 connections, we saw speeds in the 250 to 400 Mbps range and, on 2.4-GHz channels, those numbers were usually in the 50 to 150 Mbps range. 

With iPerf3, we test all devices at both a near (5 feet or so) and far (25 feet or so) distance from the router. We also test under both uncongested (only device using the network) and congested (other devices sapping bandwidth) conditions. We benchmark on every band that the router supports (2.4 GHz, 5 GHz and 6 GHz). Note that 6 GHz is only supported by Wi-Fi 6E and Wi-Fi 7.

If you’re gaming, latency may actually be more important than throughput, because you’re not usually transferring a ton of data when you play. What you are doing is sending your movements to the server and getting a response back so that process has to be quick. We measure latency by pinging our local server under all the same conditions that we use for throughput (near, fear, congested and uncongested). 

Latency is measured in milliseconds and can go anywhere from 2 milliseconds up to 20+ milliseconds. Lower is better.

This post was originally published on this site