How to Set Up RetroPie on Raspberry Pi 4 (Updated)

In the 1980s and 1990s, the arcades were the place to be. The latest games ate our quarters as we pursued ever higher scores. Those days are now sadly behind us but retro gaming has seen massive growth in the past decade. 

Using a Raspberry Pi, you can run a variety of emulators that allow you to play not only old-time arcade games, but also your favorite titles from tons of old consoles, including the Atari 2600, NES, Nintendo 64, Sega Genesis and Gameboy. There are a number of emulation platforms available, but RetroPie is by far the most popular and arguably the best. 

Up until recently, installing RetroPie on a Raspberry Pi 4 was a pain in the butt. Even though Raspberry Pi 4 came out in June 2019, RetroPie didn’t officially support it for nearly a year and there were some manual steps you needed to take to make it work. Now, not only can  you install RetroPie on a Raspberry Pi 4, but you can do it using the Raspberry Pi imager. It couldn’t be easier.

In this how-to we guide you through setting up your own RetroPie setup, show how to copy ROMs (your games) to the Pi via USB and network shares, connect a controller via Bluetooth, and finally create our own custom boot splash screen. 

What You Need 

How to Install RetroPie on Raspberry Pi 4 (or earlier) 

1. Open Raspberry Pi Imager on your PC and click on CHOOSE OS. 

(Image credit: Tom’s Hardware)

2. Select Emulation and game OS. Raspberry Pi Imager groups operating systems by their use. For example there are sections for media players, 3D printing and general purpose OS. 

(Image credit: Tom’s Hardware)

3. Select RetroPie.

(Image credit: Tom’s Hardware)

4. Select the version of RetroPie for your model (ex: RetroPie 4.6 (RPi4)).

(Image credit: Tom’s Hardware)

5. Insert your microSD card and click on CHOOSE SD CARD.

(Image credit: Tom’s Hardware)

6. Click on WRITE to write RetroPie to the microSD card.

How to Install RetroPie Tutorial

(Image credit: Tom’s Hardware)

7. Eject the microSD card and insert it into your Raspberry Pi 4. Plug in a controller. XBox One and Playstation 4 pads are compatible with RetroPie via Bluetooth, but require a USB connection until Bluetooth is configured.

8. Power on the Raspberry Pi and wait for your controller to be detected.

(Image credit: Tom’s Hardware)

9. Configure your controller.

(Image credit: Tom’s Hardware)

Note that you probably will have fewer buttons on your controller than RetroPie asks you to configure. Just hold down a button that you’ve already configured to skip past any options you don’t need.

10. Press the A button on your controller to close the configurations menu and open the main menu.

(Image credit: Tom’s Hardware)

Adding Games To RetroPie 

All the games exist as files called ROMs, which are dumps of real boards / cartridges. The easiest method to add games is to use a USB stick to transfer the files from your computer to your Raspberry Pi. But note that games from retro consoles are under copyright no matter their age. If you don’t personally own the cartridge / board and rip a copy of your own, downloading and distributing these ROMs may violate laws in your country so proceed at your own risk.

1. On your computer create a folder called retropie on a FAT32 / exFAT formatted USB flash drive.

2. Plug the USB flash drive into the Raspberry Pi 4 and RetroPie will create a folder structure inside the retropie folder on the stick.

3. Remove the flash drive and insert it into your computer. 

(Image credit: Tom’s Hardware)

4. Copy your games to the correct system / console folder in retropie/roms/. For example, put atari 2600 games in the /atari2600 folder.

5. Eject the flash drive from your computer and place it back into a USB port of the Raspberry Pi 4. The time that this will take depends on how many games are transferred over. This could take minutes for a few games, or hours if transferring a large amount.

6. When complete, remove the USB flash drive and press START and from the menu select Restart Emulationstation / Restart System. The games list will now update and show the available computers / consoles for which there are now games.

Adding Games via SMB (Samba) 

Adding games via a network share is a convenient and laughably simple task thanks to RetroPie automatically configuring an SMB (Samba) share. ROM transfer times will vary greatly depending on your connection (Ethernet being the preference) and the amount of ROMs and their size.

1. On your Windows machine, open the file manager.

2. In the address bar type in the following address and press Enter.

//RETROPIE

RertoPie

(Image credit: Tom’s Hardware)

3. Copy your ROMs into the relevant system via the roms folder. The RetroPie network share has four folders, bios, configs, roms and splash screens. 

RertoPie

(Image credit: Tom’s Hardware)

Please keep in mind that, when it comes to playing retro arcade games from actual arcade machines, not all ROMs are compatible with all emulators. Retropie can run with ten different versions of MAME (Multiple Arcade Machine Emulator), the most popular arcade emulator, and some ROMs will run on some versions of MAME and others will work on others. RetroPie maintains a handy chart, but if your arcade games don’t load in one MAME, try another. 

Adding Bluetooth Controllers

Sitting back and relaxing while we game used to mean a tangle of wires. But with Bluetooth you can easily connect our favorite games controller and play in comfort. RetroPie has an easy to follow wizard that steps you through the process.

1. Select the RetroPie menu.

(Image credit: Tom’s Hardware)

2. Scroll down and select Bluetooth.

(Image credit: Tom’s Hardware)

3. In the new menu select Pair and Connect Bluetooth Device. 

(Image credit: Tom’s Hardware)

4. Select your device from the list. Devices are listed by their Bluetooth MAC address, which is typically printed on your controller.

(Image credit: Tom’s Hardware)

5. Validate the connection using a security mode. This will confirm that your Raspberry Pi is connected to the correct controller. If the first security mode does not work, try the next in line.

(Image credit: Tom’s Hardware)

6. Select Configure bluetooth connect mode. This will set up how Bluetooth connects to our controller.

(Image credit: Tom’s Hardware)

7. Set the connection to happen at boot. This forces RetroPie to connect to our controller as soon as the system is ready.

(Image credit: Tom’s Hardware)

The controller is now connected and ready for use with RetroPie. Note that some emulators may require additional tweaks for specific layouts.Most Bluetooth controllers will work straight away, but some, such as those from 8bitdo, require additional steps to get working.

Adding a Splash Screen

(Image credit: Tom’s Hardware)

The default RetroPie splash screen, the screen that appears when the Raspberry Pi is powered up, is perfectly fine, but what if you could add our own? Well, you can. RetroPie has a simple menu where you can add your own images for use at startup.

1. Select the RetroPie menu.

(Image credit: Tom’s Hardware)

2. Select Splash Screens.

(Image credit: Tom’s Hardware)

3. Select Choose splashscreen.

(Image credit: Tom’s Hardware)

4. Select Own / Extra Splashscreens. This will produce an error as the folder does not yet exist. By doing this we create the folder where the images can be stored.

(Image credit: Tom’s Hardware)

5. On your Windows PC, open the SMB share RETROPIEsplashscreens and copy the image that you wish to use. We used a 1920 x 1080p PNG of the Tom’s Hardware logo.

(Image credit: Tom’s Hardware)

6. Repeat steps 1 to 4. You will see the image that was copied to the folder. Select the image.

(Image credit: Tom’s Hardware)

7. Reboot the Raspberry Pi and your new splash screen will be displayed.

RertoPie

(Image credit: Tom’s Hardware)

This post was originally published on this site